Filamentive
ePLA
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 220–240 °C |
| Bed | 50–60 °C |
| Speed | 120 mm/s |
| Fan | — |
| Drying (temp / time) | 60 °C / 2 h |
| Density | 1.27 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40MPa |
|---|---|
| Tensile modulus | 4000MPa |
| Elongation at break | 47% |
| Flexural strength | –MPa |
| Impact strength | 23kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 95°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.