Filatech
FilaFlexible40
TPE
Print parameters
| Nozzle | 220–240 °C |
|---|---|
| Bed | 50–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 400% |
| Flexural strength | 4.4MPa |
| Impact strength | –kJ/m² |
| Hardness | 40D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.