Fillamentum
ASA CF10 Carbon
ASA-CF1.75 mm
Requires enclosureRequires hardened nozzle
Composition / filler: carbon fiber (10 %)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 245–275 °C |
| Bed | 80–105 °C |
| Speed | 30–120 mm/s |
| Fan | — |
| Drying (temp / time) | 80 °C / 3 h |
| Density | 1.04 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 38MPa |
|---|---|
| Tensile modulus | 2800MPa |
| Elongation at break | 10% |
| Flexural strength | –MPa |
| Impact strength | 23kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 90°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.