Fillamentum
CPE CF112 Carbon
CPE-CF1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–270 °C |
| Bed | 70–85 °C |
| Speed | 20–40 mm/s |
| Fan | 0–15 % |
| Drying (temp / time) | — |
| Density | 1.16 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 52.4MPa |
|---|---|
| Tensile modulus | 2200MPa |
| Elongation at break | 8% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 77D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.