Fillamentum
PETG
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 235–255 °C |
| Bed | 65–75 °C |
| Speed | — |
| Fan | 0–30 % |
| Drying (temp / time) | 65 °C / 3 h |
| Density | 1.27 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50MPa |
|---|---|
| Tensile modulus | 1900MPa |
| Elongation at break | 120% |
| Flexural strength | 71MPa |
| Impact strength | –kJ/m² |
| Hardness | 75D Shore |
| HDT (heat deflection) | 62°C |
| Glass transition (Tg) | — |
| VICAT | 75°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.