Fillamentum
PP 2320
PP1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 225–245 °C |
| Bed | 90–105 °C |
| Speed | 20–40 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 0.96 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 23MPa |
|---|---|
| Tensile modulus | 1400MPa |
| Elongation at break | 20% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.