FILOALFA
ALFALOY 35
PC1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–290 °C |
| Bed | 85–100 °C |
| Speed | ≤ 120 mm/s |
| Fan | — |
| Drying (temp / time) | 90 °C / 4 h |
| Density | 1.223 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 79MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | 119MPa |
| Impact strength | 10kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 118°C |
| Glass transition (Tg) | — |
| VICAT | 140°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.