FormFutura
ApolloX CF10
ASA1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–265 °C |
| Bed | 90–110 °C |
| Speed | — |
| Fan | 0 % |
| Drying (temp / time) | — |
| Density | 1.1 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 79MPa |
|---|---|
| Tensile modulus | 7580MPa |
| Elongation at break | 1.8% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 100.5°C |
| Glass transition (Tg) | — |
| VICAT | 101.6°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.