FormFutura
CarbonFil
PETG-CF1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230–275 °C |
| Bed | 80–90 °C |
| Speed | 25–70 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | 50 °C / 12 h |
| Density | 1.32 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 45MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 4.9% |
| Flexural strength | –MPa |
| Impact strength | 5.4kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 80°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.