FormFutura
EasyFil ABS - Glow in the Dark
ABS1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230–255 °C |
| Bed | 100 °C |
| Speed | 25–100 mm/s |
| Fan | 0–35 % |
| Drying (temp / time) | 40 °C / 6 h |
| Density | 1.05 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 45.1MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 10% |
| Flexural strength | 72.6MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 85°C |
| Glass transition (Tg) | — |
| VICAT | 93°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.