FormFutura
High Gloss PLA
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 210–240 °C |
| Bed | 40–60 °C |
| Speed | 25–110 mm/s |
| Fan | 80–100 % |
| Drying (temp / time) | — |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 45MPa |
|---|---|
| Tensile modulus | 2700MPa |
| Elongation at break | 10% |
| Flexural strength | 72MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 50°C |
| Glass transition (Tg) | 57 °C |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.