FormFutura
LUVOCOM 3F PAHT 9825
PA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 270–290 °C |
| Bed | 50–70 °C |
| Speed | — |
| Fan | 0–25 % |
| Drying (temp / time) | 130 °C / 7 h |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 85MPa |
|---|---|
| Tensile modulus | 3400MPa |
| Elongation at break | 3.6% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 90°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.