FormFutura
LUVOCOM 3F PP CF 9928
PP-CF1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 220–250 °C |
| Bed | 40–80 °C |
| Speed | — |
| Fan | 10–50 % |
| Drying (temp / time) | 82 °C / 3 h |
| Density | 1 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 54MPa |
|---|---|
| Tensile modulus | 7000MPa |
| Elongation at break | 1.2% |
| Flexural strength | 78MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 80°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.