FormFutura
Matt PLA
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 215–235 °C |
| Bed | 50–60 °C |
| Speed | — |
| Fan | 50–100 % |
| Drying (temp / time) | — |
| Density | 1.38 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 46MPa |
|---|---|
| Tensile modulus | 3973MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | 3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 57°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.