FormFutura
Volcano PLA 150C
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 195–225 °C |
| Bed | 45–65 °C |
| Speed | 25–200 mm/s |
| Fan | 50–100 % |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 43MPa |
|---|---|
| Tensile modulus | 2500MPa |
| Elongation at break | 11% |
| Flexural strength | –MPa |
| Impact strength | 2kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 110°C |
| Glass transition (Tg) | — |
| VICAT | 140°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.