Forward AM
PA6 GF30
PA-GF1.75 mm
Requires enclosureRequires hardened nozzle
Composition / filler: glass fiber (30 %)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–280 °C |
| Bed | 70–100 °C |
| Speed | 30–60 mm/s |
| Fan | — |
| Drying (temp / time) | 100 °C / 16 h |
| Density | 1.356 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 78.3MPa |
|---|---|
| Tensile modulus | 5036MPa |
| Elongation at break | 2.2% |
| Flexural strength | 147.4MPa |
| Impact strength | 8.9kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 82°C |
| Glass transition (Tg) | 67 °C |
| VICAT | 192°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.