Forward AM
PC/ABS FR
PC-ABS1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–280 °C |
| Bed | 90–110 °C |
| Speed | 30–300 mm/s |
| Fan | — |
| Drying (temp / time) | 60 °C / 16 h |
| Density | 1.193 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50.1MPa |
|---|---|
| Tensile modulus | 2545MPa |
| Elongation at break | 10.7% |
| Flexural strength | 88.1MPa |
| Impact strength | 13.3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 81°C |
| Glass transition (Tg) | 94 °C |
| VICAT | 90°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.