Forward AM
Ultrafuse ASA
ASA1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–280 °C |
| Bed | 100–120 °C |
| Speed | 30–60 mm/s |
| Fan | — |
| Drying (temp / time) | 60 °C / 4 h |
| Density | 1.069 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 34.6MPa |
|---|---|
| Tensile modulus | 1828MPa |
| Elongation at break | 4.5% |
| Flexural strength | 59.4MPa |
| Impact strength | 8.9kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 92°C |
| Glass transition (Tg) | 112 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.