Forward AM
Ultrafuse PLA Tough
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–220 °C |
| Bed | 50–70 °C |
| Speed | 40–300 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.215 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40MPa |
|---|---|
| Tensile modulus | 2672MPa |
| Elongation at break | 7.4% |
| Flexural strength | 73MPa |
| Impact strength | 8.6kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 57°C |
| Glass transition (Tg) | 62 °C |
| VICAT | 59°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.