Forward AM
Ultrafuse PP GF30
PP-GF1.75 mm
Requires hardened nozzle
Composition / filler: glass fiber (30 %)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–260 °C |
| Bed | 20–90 °C |
| Speed | 30–80 mm/s |
| Fan | — |
| Drying (temp / time) | 60 °C / 4 h |
| Density | 1.066 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 41.7MPa |
|---|---|
| Tensile modulus | 2628MPa |
| Elongation at break | 4.4% |
| Flexural strength | 76.8MPa |
| Impact strength | 5.3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 73°C |
| Glass transition (Tg) | -5 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.