Francofil
PLA
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 190–230 °C |
| Bed | 40–60 °C |
| Speed | 30–100 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 51MPa |
|---|---|
| Tensile modulus | 2612MPa |
| Elongation at break | 2.5% |
| Flexural strength | 100MPa |
| Impact strength | 2.6kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 57.5 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.