IPCON
PA6 GF
PA-GF
Requires enclosureRequires hardened nozzle
Composition / filler: PA6 + glass fiber
Print parameters
| Nozzle | 270–300 °C |
|---|---|
| Bed | 80–100 °C |
| Speed | ≤ 300 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | 105 °C / 11 h |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 86/61XY/ZMPa |
|---|---|
| Tensile modulus | 4795/2842XY/ZMPa |
| Elongation at break | 4.2/2.5XY/Z% |
| Flexural strength | 140/103XY/ZMPa |
| Impact strength | 63.4/15.8XY/ZkJ/m² |
| Hardness | 82D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 198°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.