IPCON
PET DET & FC
PET
Composition / filler: Polyethylene Terephthalate (PET)
Print parameters
| Nozzle | 270–300 °C |
|---|---|
| Bed | 65–80 °C |
| Speed | ≤ 300 mm/s |
| Fan | 10–40 % |
| Drying (temp / time) | 68 °C / 7 h |
| Density | 1.39 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 33/17XY/ZMPa |
|---|---|
| Tensile modulus | 1675/1454XY/ZMPa |
| Elongation at break | 14.7/7.1XY/Z% |
| Flexural strength | 63/41XY/ZMPa |
| Impact strength | 47.8/7.3XY/ZkJ/m² |
| Hardness | 78D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 76°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.