IPCON
PETG GF
PETG-GF1.75 mm
Requires hardened nozzle
Composition / filler: PETG + glass fiber
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 245–270 °C |
| Bed | 65–75 °C |
| Speed | ≤ 300 mm/s |
| Fan | 10–90 % |
| Drying (temp / time) | 68 °C / 7 h |
| Density | 1.32 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 46/32XY/ZMPa |
|---|---|
| Tensile modulus | 2835/1967XY/ZMPa |
| Elongation at break | 16.2/12.1XY/Z% |
| Flexural strength | 78/53XY/ZMPa |
| Impact strength | 21.1/10.4XY/ZkJ/m² |
| Hardness | 77D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 78°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.