IPCON
PETG Metal
PETG
Composition / filler: Metal-look Poly (ethylene terephthalate-co-1,4-cyclohexylenedimethylene terephthalate) / Polyethylene terephthalate glycol (PETG)
Print parameters
| Nozzle | 240–270 °C |
|---|---|
| Bed | 65–75 °C |
| Speed | ≤ 300 mm/s |
| Fan | 10–90 % |
| Drying (temp / time) | 63 °C / 7 h |
| Density | 1.26 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 38/34XY/ZMPa |
|---|---|
| Tensile modulus | 1673/1527XY/ZMPa |
| Elongation at break | 16.3/13.5XY/Z% |
| Flexural strength | 65/59XY/ZMPa |
| Impact strength | 76.8/20.8XY/ZkJ/m² |
| Hardness | 75D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 72°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.