IPCON
PLA FC
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 190–230 °C |
| Bed | 35–65 °C |
| Speed | ≤ 300 mm/s |
| Fan | 60–100 % |
| Drying (temp / time) | 58 °C / 7 h |
| Density | 1.39 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 34/19XY/ZMPa |
|---|---|
| Tensile modulus | 2683/2458XY/ZMPa |
| Elongation at break | 10.5/7.1XY/Z% |
| Flexural strength | 64/40XY/ZMPa |
| Impact strength | 29.6/6.1XY/ZkJ/m² |
| Hardness | 81D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 60°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.