IPCON
PPA
PPA
Requires enclosure
Print parameters
| Nozzle | 280–310 °C |
|---|---|
| Bed | 100–120 °C |
| Speed | ≤ 300 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | 115 °C / 12 h |
| Density | 1.14 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 76/40XY/ZMPa |
|---|---|
| Tensile modulus | 2863/2677XY/ZMPa |
| Elongation at break | 3.4/1.6XY/Z% |
| Flexural strength | 123/62XY/ZMPa |
| Impact strength | 32.8/5.4XY/ZkJ/m² |
| Hardness | 87D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 106°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.