IPCON
PPA CF
PPA-CF
Requires enclosureRequires hardened nozzle
Composition / filler: Carbon Fiber Reinforced Polyphthalamide (PPA CF)
Print parameters
| Nozzle | 280–310 °C |
|---|---|
| Bed | 100–120 °C |
| Speed | ≤ 250 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | 120 °C / 12 h |
| Density | 1.26 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 169/58XY/ZMPa |
|---|---|
| Tensile modulus | 12673/4269XY/ZMPa |
| Elongation at break | 2.2/1.2XY/Z% |
| Flexural strength | 256/80XY/ZMPa |
| Impact strength | 34.2/4.6XY/ZkJ/m² |
| Hardness | 88D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 233°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.