IPCON
PPA GF
PPA-GF
Requires enclosureRequires hardened nozzle
Composition / filler: Glass Fiber Reinforced Polyphthalamide (PPA GF)
Print parameters
| Nozzle | 280–310 °C |
|---|---|
| Bed | 100–120 °C |
| Speed | ≤ 250 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | 120 °C / 12 h |
| Density | 1.28 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 106/52XY/ZMPa |
|---|---|
| Tensile modulus | 6558/3472XY/ZMPa |
| Elongation at break | 2.1/1XY/Z% |
| Flexural strength | 159/75XY/ZMPa |
| Impact strength | 30.2/4.8XY/ZkJ/m² |
| Hardness | 87D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 231°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.