IPCON
PPA GF FR
PPA-GF
Requires enclosureRequires hardened nozzle
Composition / filler: Glass fiber reinforced flame retardant polyphthalamide (PPA GF FR)
Print parameters
| Nozzle | 280–300 °C |
|---|---|
| Bed | 100–120 °C |
| Speed | ≤ 250 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | 115 °C / 12 h |
| Density | 1.32 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 73/38XY/ZMPa |
|---|---|
| Tensile modulus | 7352/3896XY/ZMPa |
| Elongation at break | 8.2/5.6XY/Z% |
| Flexural strength | 134/62XY/ZMPa |
| Impact strength | 22.3/5.9XY/ZkJ/m² |
| Hardness | 88D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 223°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.