IPCON
PPS GF
PPS-GF
Requires enclosureRequires hardened nozzle
Composition / filler: Glass Fiber Reinforced Polyphenylene Sulfide (PPS GF)
Print parameters
| Nozzle | 320–360 °C |
|---|---|
| Bed | 100–120 °C |
| Speed | ≤ 300 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | 120 °C / 7 h |
| Density | 1.36 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 72/42XY/ZMPa |
|---|---|
| Tensile modulus | 5764/2581XY/ZMPa |
| Elongation at break | 1.6/0.7XY/Z% |
| Flexural strength | 112/58XY/ZMPa |
| Impact strength | 31.7/10.6XY/ZkJ/m² |
| Hardness | 83D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 258°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.