Matter3D
ABS GF10
ABS-GF1.75 mm
Requires enclosureRequires hardened nozzle
Composition / filler: glass fiber (10 %)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 245–265 °C |
| Bed | 90–110 °C |
| Speed | — |
| Fan | 0–20 % |
| Drying (temp / time) | 80 °C / 3 h |
| Density | — |
Mechanical & thermal properties
| Tensile strength | 68MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | 8kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 110°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.