Matter3D
Performance Nylon
PA1.75 mm
Requires enclosure
Composition / filler: PA6/66 unfilled
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–285 °C |
| Bed | 70–100 °C |
| Speed | 40–70 mm/s |
| Fan | — |
| Drying (temp / time) | 70 °C / 8 h |
| Density | — |
Mechanical & thermal properties
| Tensile strength | 82.5MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 92.5°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.