Mingda
ABS-GF25
ABS-GF1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–270 °C |
| Bed | 100–110 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 65 °C / 5 h |
| Density | 1.15 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 48.48MPa |
|---|---|
| Tensile modulus | 3752MPa |
| Elongation at break | 2.1% |
| Flexural strength | 78.8MPa |
| Impact strength | 8.91kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 93°C |
| Glass transition (Tg) | 101 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.