Mingda
PPS-GF20
PPS-GF1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 310–350 °C |
| Bed | 80–90 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 120 °C / 6 h |
| Density | 1.36 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 64.1MPa |
|---|---|
| Tensile modulus | 4552MPa |
| Elongation at break | 2% |
| Flexural strength | 102.3MPa |
| Impact strength | 7.3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 125.8°C |
| Glass transition (Tg) | 95 °C |
| VICAT | 272.5°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.