Nanovia
ABS EF
ABS1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–260 °C |
| Bed | 100–110 °C |
| Speed | 20–60 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.03 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 29/26XY/ZMPa |
|---|---|
| Tensile modulus | 1820/1820XY/ZMPa |
| Elongation at break | 2.3/2.1XY/Z% |
| Flexural strength | –MPa |
| Impact strength | 18kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 110 °C |
| VICAT | 102°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.