Nanovia
HIPS
HIPS1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230–250 °C |
| Bed | 90–110 °C |
| Speed | 60 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.04 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 16/–XY/ZMPa |
|---|---|
| Tensile modulus | 2000/–XY/ZMPa |
| Elongation at break | 1/–XY/Z% |
| Flexural strength | –MPa |
| Impact strength | 11kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 74°C |
| Glass transition (Tg) | 100 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.