Nanovia
HYMAG'IN FILAMAG-F
Other1.75 mm
Requires hardened nozzle
Composition / filler: Flexible polymer matrix + magnetic ferrites (HYMAG'IN partner formulation)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230 °C |
| Bed | 45 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 2.8 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 11MPa |
|---|---|
| Tensile modulus | 559MPa |
| Elongation at break | 9.2% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 98A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.