Nanovia
Insublend
Other1.75 mm
Requires enclosure
Composition / filler: Proprietary flame-retardant high-temperature polymer blend (chemistry undisclosed by manufacturer)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–280 °C |
| Bed | 130–150 °C |
| Speed | 50–70 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.08 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | 67MPa |
| Elongation at break | 20% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 114°C |
| Glass transition (Tg) | 140 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.