Nanovia
PC-PTFE
PC1.75 mm
Requires enclosure
Composition / filler: PC + PTFE (low-friction blend)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 270–290 °C |
| Bed | 110–130 °C |
| Speed | 20–70 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.26 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 38MPa |
|---|---|
| Tensile modulus | 1775MPa |
| Elongation at break | 4.4% |
| Flexural strength | –MPa |
| Impact strength | 12kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.