Nanovia
PETG CF
PETG-CF1.75 mm
Requires hardened nozzle
Composition / filler: PETG + carbon fibers
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 220–240 °C |
| Bed | 80–90 °C |
| Speed | 20–60 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.35 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50/28XY/ZMPa |
|---|---|
| Tensile modulus | 4150/2280XY/ZMPa |
| Elongation at break | 2.7/1.6XY/Z% |
| Flexural strength | –MPa |
| Impact strength | 20kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 80 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.