Nebula Filaments
PLA Silk
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 200–240 °C |
| Bed | 40–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 45 °C / 4 h |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 59MPa |
|---|---|
| Tensile modulus | 2700MPa |
| Elongation at break | 9% |
| Flexural strength | 72MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 51°C |
| Glass transition (Tg) | 57.5 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.