Overture3D
Easy Nylon
PA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 245–260 °C |
| Bed | 50 °C |
| Speed | 30–70 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 95 °C / 7 h |
| Density | 1.12 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/50.3XY/ZMPa |
|---|---|
| Tensile modulus | 2349MPa |
| Elongation at break | 8.4% |
| Flexural strength | 85MPa |
| Impact strength | 7.9kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 181.2°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.