Overture3D
Easy PLA
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 190–220 °C |
| Bed | 25–60 °C |
| Speed | 40–90 mm/s |
| Fan | — |
| Drying (temp / time) | 50 °C / 7 h |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 44.3MPa |
|---|---|
| Tensile modulus | 2650MPa |
| Elongation at break | 5.6% |
| Flexural strength | 82.5MPa |
| Impact strength | 2.9kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 66.2°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.