Overture3D
PETG
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230–260 °C |
| Bed | 65–70 °C |
| Speed | 300 mm/s |
| Fan | 100 % |
| Drying (temp / time) | 60 °C / 5 h |
| Density | 1.3 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/45.7XY/ZMPa |
|---|---|
| Tensile modulus | 2311.1MPa |
| Elongation at break | 9.3% |
| Flexural strength | 80.1MPa |
| Impact strength | 20.2kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 75°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.