Polymaker
ABS Max
ABS1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 270–300 °C |
| Bed | 120 °C |
| Speed | ≤ 200 mm/s |
| Fan | 0–30 % |
| Drying (temp / time) | 70 °C / 6 h |
| Density | 1.06 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 35.66/25.41XY/ZMPa |
|---|---|
| Tensile modulus | 2320/2100XY/ZMPa |
| Elongation at break | 6.72/1.81XY/Z% |
| Flexural strength | 63.29/45.12XY/ZMPa |
| Impact strength | 10.51/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 113.1°C |
| Glass transition (Tg) | 126.3 °C |
| VICAT | 127.4°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.