Polymaker
Fiberon PET-GF15
PET-GF1.75 mm
Requires hardened nozzle
Composition / filler: glass fiber (15 %)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 280–310 °C |
| Bed | 70–80 °C |
| Speed | ≤ 250 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 100 °C / 10 h |
| Density | 1.43 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 59.9/48.2XY/ZMPa |
|---|---|
| Tensile modulus | 4144.2/3428.9XY/ZMPa |
| Elongation at break | 4/2.6XY/Z% |
| Flexural strength | 104.2/80.3XY/ZMPa |
| Impact strength | 8.7/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 71.8°C |
| Glass transition (Tg) | 59.5 °C |
| VICAT | 232.6°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.