Polymaker
Fiberon PPS-CF10
PPS-CF1.75 mm
Requires hardened nozzle
Composition / filler: carbon fiber (10 %)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 310–350 °C |
| Bed | 80–90 °C |
| Speed | ≤ 300 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 100 °C / 10 h |
| Density | 1.29 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 59.4/32XY/ZMPa |
|---|---|
| Tensile modulus | 5446.7/2790XY/ZMPa |
| Elongation at break | 1.4/1.6XY/Z% |
| Flexural strength | 94.3/30XY/ZMPa |
| Impact strength | 5.3/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 133°C |
| Glass transition (Tg) | 97.7 °C |
| VICAT | 267.5°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.