Polymaker
Fiberon PPS-GF20
PPS-GF1.75 mm
Requires hardened nozzle
Composition / filler: glass fiber (20 %)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 310–350 °C |
| Bed | 80–90 °C |
| Speed | ≤ 250 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 100 °C / 10 h |
| Density | 1.36 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 64.1/22.9XY/ZMPa |
|---|---|
| Tensile modulus | 4552/2557.2XY/ZMPa |
| Elongation at break | 2/1.1XY/Z% |
| Flexural strength | 102.3/45.7XY/ZMPa |
| Impact strength | 7.3/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 125.8°C |
| Glass transition (Tg) | 95 °C |
| VICAT | 272.5°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.