Polymaker
Panchroma Silk PLA
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 190–230 °C |
| Bed | 25–60 °C |
| Speed | ≤ 250 mm/s |
| Fan | — |
| Drying (temp / time) | 55 °C / 6 h |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 41.1/23.8XY/ZMPa |
|---|---|
| Tensile modulus | 2403/–XY/ZMPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | 13.8kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 64.7°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.